Amazon Web Services DOP-C02 Exam Questions Free Practice Test

Viewing page 7 out of 10 pages

Viewing questions 61-70 out of questions

Questions # 61:

A company requires an RPO of 2 hours and an RTO of 10 minutes for its data and application at all times. An application uses a MySQL database and Amazon EC2 web servers. The development team needs a strategy for failover and disaster recovery.

Which combination of deployment strategies will meet these requirements? (Select TWO.)

Options:

Create an Amazon Aurora cluster in one Availability Zone across multiple Regions as the data store Use Aurora's automatic recovery capabilities in the event of a disaster

Create an Amazon Aurora global database in two Regions as the data store. In the event of a failure promote the secondary Region as the primary for the application.

Create an Amazon Aurora multi-master cluster across multiple Regions as the data store. Use a Network Load Balancer to balance the database traffic in different Regions.

Set up the application in two Regions and use Amazon Route 53 failover-based routing that points to the Application Load Balancers in both Regions. Use hearth checks to determine the availability in a given Region. Use Auto Scaling groups in each Region to adjust capacity based on demand.

Set up the application m two Regions and use a multi-Region Auto Scaling group behind Application Load Balancers to manage the capacity based on demand. In the event of a disaster adjust the Auto Scaling group's desired instance count to increase baseline capacity in the failover Region.

Expert Solution

Questions # 62:

A company has proprietary data available by using an Amazon CloudFront distribution. The company needs to ensure that the distribution is accessible by only users from the corporate office that have a known set of IP address ranges. An AWS WAF web ACL is associated with the distribution and has a default action set to Count.

Which solution will meet these requirements with the LEAST operational overhead?

Options:

Create a new regex pattern set. Add the regex pattern set to a new rule group. Create a new web ACL that has a default action set to Block. Associate the web ACL with the CloudFront distribution. Add a rule that allows traffic based on the new rule group.

Create an AWS WAF IP address set that matches the corporate office IP address range. Create a new web ACL that has a default action set to Allow. Associate the web ACL with the CloudFront distribution. Add a rule that allows traffic from the IP address set.

Create a new regex pattern set. Add the regex pattern set to a new rule group. Set the default action on the existing web ACL to Allow. Add a rule that has priority 0 that allows traffic based on the regex pattern set.

Create a WAF IP address set that matches the corporate office IP address range. Set the default action on the existing web ACL to Block. Add a rule that has priority 0 that allows traffic from the IP address set.

Expert Solution

Questions # 63:

A company is storing 100 GB of log data in .csv format in an Amazon S3 bucket. SQL developers want to query this data and generate graphs to visualize it. The SQL developers also need an efficient, automated way to store metadata from the .csv file. Which combination of steps will meet these requirements with the LEAST amount of effort? (Select THREE.)

Options:

Filter the data through AWS X-Ray to visualize the data.

Filter the data through Amazon QuickSight to visualize the data.

Query the data with Amazon Athena.

Use the AWS Glue Data Catalog as the persistent metadata store.

Use Amazon DynamoDB as the persistent metadata store.

Query the data with Amazon Redshift.

Expert Solution

Questions # 64:

A company’s security team requires that all external Application Load Balancers (ALBs) and Amazon API Gateway APIs are associated with AWS WAF web ACLs. The company has hundreds of AWS accounts, all of which are included in a single organization in AWS Organizations. The company has configured AWS Config for the organization. During an audit, the company finds some externally facing ALBs that are not associated with AWS WAF web ACLs.

Which combination of steps should a DevOps engineer take to prevent future violations? (Choose two.)

Options:

Delegate AWS Firewall Manager to a security account.

Delegate Amazon GuardDuty to a security account.

Create an AWS Firewall Manager policy to attach AWS WAF web ACLs to any newly created ALBs and API Gateway APIs.

Create an Amazon GuardDuty policy to attach AWS WAF web ACLs to any newly created ALBs and API Gateway APIs.

Configure an AWS Config managed rule to attach AWS WAF web ACLs to any newly created ALBs and API Gateway APIs.

Expert Solution

Questions # 65:

A company has a data ingestion application that runs across multiple AWS accounts. The accounts are in an organization in AWS Organizations. The company needs to monitor the application and consolidate access to the application. Currently the company is running the application on Amazon EC2 instances from several Auto Scaling groups. The EC2 instances have no access to the internet because the data is sensitive Engineers have deployed the necessary VPC endpoints. The EC2 instances run a custom AMI that is built specifically tor the application.

To maintain and troubleshoot the application, system administrators need the ability to log in to the EC2 instances. This access must be automated and controlled centrally. The company's security team must receive a notification whenever the instances are accessed.

Which solution will meet these requirements?

Options:

Create an Amazon EventBridge rule to send notifications to the security team whenever a user logs in to an EC2 instance Use EC2 Instance Connect to log in to the instances. Deploy Auto Scaling groups by using AWS Cloud Formation Use the cfn-init helper script to deploy appropriate VPC routes for external access Rebuild the custom AMI so that the custom AMI includes AWS Systems Manager Agent.

Deploy a NAT gateway and a bastion host that has internet access Create a security group that allows incoming traffic on all the EC2 instances from the bastion host Install AWS Systems Manager Agent on all the EC2 instances Use Auto Scaling group lifecycle hooks for monitoring and auditing access Use Systems Manager Session Manager to log in to the instances Send logs to a log group m Amazon CloudWatch Logs. Export data to Amazon S3 for aud

Use EC2 Image Builder to rebuild the custom AMI Include the most recent version of AWS Systems Manager Agent in the Image Configure the Auto Scaling group to attach the AmazonSSMManagedinstanceCore role to all the EC2 instances Use Systems Manager Session Manager to log in to the instances Enable logging of session details to Amazon S3 Create an S3 event notification for new file uploads to send a message to the security team through an Ama

Use AWS Systems Manager Automation to build Systems Manager Agent into the custom AMI Configure AWS Configure to attach an SCP to the root organization account to allow the EC2 instances to connect to Systems Manager Use Systems Manager Session Manager to log in to the instances Enable logging of session details to Amazon S3 Create an S3 event notification for new file uploads to send a message to the security team through an Amazon Simple

Expert Solution

Questions # 66:

A company has deployed an application in a production VPC in a single AWS account. The application is popular and is experiencing heavy usage. The company’s security team wants to add additional security, such as AWS WAF, to the application deployment. However, the application's product manager is concerned about cost and does not want to approve the change unless the security team can prove that additional security is necessary.

The security team believes that some of the application's demand might come from users that have IP addresses that are on a deny list. The security team provides the deny list to a DevOps engineer. If any of the IP addresses on the deny list access the application, the security team wants to receive automated notification in near real time so that the security team can document that the application needs additional security. The DevOps engineer creates a VPC flow log for the production VPC.

Which set of additional steps should the DevOps engineer take to meet these requirements MOST cost-effectively?

Options:

Create a log group in Amazon CloudWatch Logs. Configure the VPC flow log to capture accepted traffic and to send the data to the log group. Create an Amazon CloudWatch metric filter for IP addresses on the deny list. Create a CloudWatch alarm with the metric filter as input. Set the period to 5 minutes and the datapoints to alarm to 1. Use an Amazon Simple Notification Service (Amazon SNS) topic to send alarm notices to the security team.

Create an Amazon S3 bucket for log files. Configure the VPC flow log to capture all traffic and to send the data to the S3 bucket. Configure Amazon Athena to return all log files in the S3 bucket for IP addresses on the deny list. Configure Amazon QuickSight to accept data from Athena and to publish the data as a dashboard that the security team can access. Create a threshold alert of 1 for successful access. Configure the alert to automati

Create an Amazon S3 bucket for log files. Configure the VPC flow log to capture accepted traffic and to send the data to the S3 bucket. Configure an Amazon OpenSearch Service cluster and domain for the log files. Create an AWS Lambda function to retrieve the logs from the S3 bucket, format the logs, and load the logs into the OpenSearch Service cluster. Schedule the Lambda function to run every 5 minutes. Configure an alert and condition in

Create a log group in Amazon CloudWatch Logs. Create an Amazon S3 bucket to hold query results. Configure the VPC flow log to capture all traffic and to send the data to the log group. Deploy an Amazon Athena CloudWatch connector in AWS Lambda. Connect the connector to the log group. Configure Athena to periodically query for all accepted traffic from the IP addresses on the deny list and to store the results in the S3 bucket. Configure an

Expert Solution

Questions # 67:

An online retail company based in the United States plans to expand its operations to Europe and Asia in the next six months. Its product currently runs on Amazon EC2 instances behind an Application Load Balancer. The instances run in an Amazon EC2 Auto Scaling group across multiple Availability Zones. All data is stored in an Amazon Aurora database instance.

When the product is deployed in multiple regions, the company wants a single product catalog across all regions, but for compliance purposes, its customer information and purchases must be kept in each region.

How should the company meet these requirements with the LEAST amount of application changes?

Options:

Use Amazon Redshift for the product catalog and Amazon DynamoDB tables for the customer information and purchases.

Use Amazon DynamoDB global tables for the product catalog and regional tables for the customer information and purchases.

Use Aurora with read replicas for the product catalog and additional local Aurora instances in each region for the customer information and purchases.

Use Aurora for the product catalog and Amazon DynamoDB global tables for the customer information and purchases.

Expert Solution

Questions # 68:

A company is implementing AWS CodePipeline to automate its testing process The company wants to be notified when the execution state fails and used the following custom event pattern in Amazon EventBridge:

Question # 68

Which type of events will match this event pattern?

Options:

Failed deploy and build actions across all the pipelines

All rejected or failed approval actions across all the pipelines

All the events across all pipelines

Approval actions across all the pipelines

Expert Solution

Questions # 69:

A highly regulated company has a policy that DevOps engineers should not log in to their Amazon EC2 instances except in emergencies. It a DevOps engineer does log in the security team must be notified within 15 minutes of the occurrence.

Which solution will meet these requirements'?

Options:

Install the Amazon Inspector agent on each EC2 instance Subscribe to Amazon EventBridge notifications Invoke an AWS Lambda function to check if a message is about user logins If it is send a notification to the security team using Amazon SNS.

Install the Amazon CloudWatch agent on each EC2 instance Configure the agent to push all logs to Amazon CloudWatch Logs and set up a CloudWatch metric filter that searches for user logins. If a login is found send a notification to the security team using Amazon SNS.

Set up AWS CloudTrail with Amazon CloudWatch Logs. Subscribe CloudWatch Logs to Amazon Kinesis Attach AWS Lambda to Kinesis to parse and determine if a log contains a user login If it does, send a notification to the security team using Amazon SNS.

Set up a script on each Amazon EC2 instance to push all logs to Amazon S3 Set up an S3 event to invoke an AWS Lambda function which invokes an Amazon Athena query to run. The Athena query checks tor logins and sends the output to the security team using Amazon SNS.

Expert Solution

Questions # 70:

A company has a continuous integration pipeline where the company creates container images by using AWS CodeBuild. The created images are stored in Amazon Elastic Container Registry (Amazon ECR). Checking for and fixing the vulnerabilities in the images takes the company too much time. The company wants to identify the image vulnerabilities quickly and notify the security team of the vulnerabilities. Which combination of steps will meet these requirements with the LEAST operational overhead? (Select TWO.)

Options:

Activate Amazon Inspector enhanced scanning for Amazon ECR. Configure the enhanced scanning to use continuous scanning. Set up a topic in Amazon Simple Notification Service (Amazon SNS).

Create an Amazon EventBridge rule for Amazon Inspector findings. Set an Amazon Simple Notification Service (Amazon SNS) topic as the rule target.

Activate AWS Lambda enhanced scanning for Amazon ECR. Configure the enhanced scanning to use continuous scanning. Set up a topic in Amazon Simple Email Service (Amazon SES).

Create a new AWS Lambda function. Invoke the new Lambda function when scan findings are detected.

Activate default basic scanning for Amazon ECR for all container images. Configure the default basic scanning to use continuous scanning. Set up a topic in Amazon Simple Notification Service (Amazon SNS).

Expert Solution

Viewing page 7 out of 10 pages

Viewing questions 61-70 out of questions

Pass the Amazon Web Services AWS Certified Professional DOP-C02 Questions and answers with CertsForce