1. Home
  2. A10 Networks
  3. System Administration 4
  4. A10-System-Administration
  5. A10 Certified Professional System Administration 4 Questions and Answers

Pass the A10 Networks System Administration 4 A10-System-Administration Questions and answers with CertsForce

 A10 Networks Exams      Go to Exam Detail      Get Premium Access
Viewing page 1 out of 1 pages
Viewing questions 1-10 out of questions
Questions # 1:

When vBlade A issues a “vcs vmaster-take-over 200” command, which statement is true?

Options:
A.

The command is ignored when the current vMaster is in vMaster maintenance mode.

B.

Any subsequent vmaster-take-over command within the chassis with a parameter smaller than 201 is ignored.

C.

The 200 priority is compared to the current vmaster’s default vrid priority to determine which device controls the chassis.

D.

If an administrator on vBlade B were to simultaneously issue command vcs vmaster-take-over 210, vBlade B would become the vMaster.

Expert Solution
Questions # 2:

In a VRRP-A topology that contains four devices, select the number of devices on which a single VRID can be simultaneously active?

Options:
A.

1

B.

2

C.

3

D.

4

Expert Solution
Questions # 3:

How are aVCS changes that are performed on the vMaster pushed to the vBlades?

Options:
A.

HA Sync needs to be done

B.

VRRP-A should be failed over

C.

Automatically

D.

aVCS reload has to be performed

Expert Solution
Questions # 4:

You are planning an Active-Active-Active VRRP-A three-device deployment that, upon failover of any device, distributes the load from a single device to both standby devices simultaneously. How many VRIDs are required?

Options:
A.

2

B.

VRID Default is enough

C.

6

D.

5

E.

3

F.

4

Expert Solution
Questions # 5:

ACOS can log the following accounting records for administrative sessions:

Options:
A.

device access attempts only

B.

syslog errors of a specified severity level

C.

device access and command entry attempts

D.

command entry attempts only

E.

syslog errors of severity greater than a specified level

Expert Solution
Questions # 6:

What is the purpose of a VRRP-A floating-IP address?

Options:
A.

To serve as a tie-breaker when selecting a VRRP-A owner.

B.

To provide a single next hop IP address for uplink and downlink devices.

C.

To use as source IP address for VRRP-A hellos.

D.

To provide a single IP to manage all VRRP-A devices in the set.

Expert Solution
Questions # 7:

Which statement correctly describes the result of the following commands?

ACOS(config)#logging host 192.168.216.45

ACOs(config)#end

ACOS#active-partition p1

Currently active partition: p1

ACOS[p1](config)#logging host 2.2.2.2

ACOS[p1](config)#logging host partition shared

Options:
A.

System logs generated from partition “p1” will be sent to logging server “2.2.2.2”, and only warning severity log messages are sent to the shared logging server’s “192.168.216.45”.

B.

System logs generated from partition “p1” will be sent to logging server “2.2.2.2”, as well as to the shared logging server’s “192.168.216.45”.

C.

System logs generated from partition “p1” will be sent to logging server “2.2.2.2”.

D.

System logs generated from partition “p1” will be sent to the shared logging server’s “192.168.216.45”.

Expert Solution
Questions # 8:

Device 1 is the vMaster in a virtual chassis. Select the command set that adds an IP address to VE interface 200 on device 3?

Options:
A.

interface ve 200 device 3 ip address 198.162.4.1 /24

B.

interface device-context 3 interface ve 200 ip address 198.162.4.1 /24

C.

interface ve 3/200 ip address 198.162.4.1 /24

D.

vcs device-context device 3 interface ve 200 ip address 198.162.4.1 /24

Expert Solution
Questions # 9:

Which statement describes the following configuration?

ACOS(config)# smtp 10.10.10.5

ACOS(config)# logging email emergency

ACOS(config)# logging email-address syslog@a10networks.com

Options:
A.

Send logs related to 10.10.10.5 to email address syslog@a10networks.com.

B.

The ACOS device is configured to send log messages by email.

C.

The ACOS administrator’s email is syslog@a10networks.com where SNMP traps will be sent.

D.

The ACOS device is configured to act as SMTP server to forward logging messages for other devices.

Expert Solution
Viewing page 1 out of 1 pages
Viewing questions 1-10 out of questions