Comprehensive and Detailed Explanation
NetApp ONTAP uses Cluster Switch Health Monitoring (CSHM) to monitor Ethernet switches associated with cluster and storage networking infrastructure.
When cluster switches are replaced, ONTAP may retain monitoring records for the previously discovered switches. If these obsolete entries remain registered, the health monitoring subsystem can continue reporting connectivity failures against devices that are no longer physically connected.
The EMS event ClusterIfIslDownWarn_Alert indicates that the cluster switch health monitor has detected an inter-switch link connectivity problem.
In this scenario, the presence of four switches in system switch ethernet show confirms that ONTAP still maintains records for both the removed and replacement switches.
The corrective action is to delete the obsolete switch entries:
system switch ethernet delete -device Switch-sw01
Repeat the operation for the second retired switch, using its actual device name.
NetApp explicitly documents this command for removing disconnected Ethernet switches from monitoring. By default, deletion requires that ONTAP no longer discover the switch through CDP or LLDP.
Option A: A controller reboot is unnecessary and introduces avoidable operational disruption.
Option C: Deleting an alert does not remove the obsolete monitoring configuration.
Option D: Reconnecting retired switches is unnecessary and does not address the outdated inventory.
Therefore, B is correct.
Official NetApp References / Study Guide Topics:
NetApp Support Engineer ONTAP — Troubleshooting NetApp hardware and software: cluster switch health monitoring, EMS alerts, switch replacement, and stale monitoring records.
NetApp ONTAP — system switch ethernet delete
NetApp — Manage Ethernet Switch Health Monitoring
=========================
Submit