To diagnose a PCI/NMI error and collect logs, use the following commands:
What it does : This command collects PCI error logs, including detailed information about PCI devices and the errors that caused the panic.
How to use : Run the command from the nodeshell to capture the required PCI log entries.
1. pelog –a –g=2
What it does : This command reads the SSRAM log file, which contains low-level error information related to PCI and other hardware subsystems.
How to use : Run the command to view the log entries directly for detailed troubleshooting.
2. rdfile /mroot/etc/log/SSRAM
B. show pci –v :
While this command displays PCI device information, it does not provide detailed error logs.
D. event log show :
This displays event log entries but does not contain the specific PCI or NMI-related logs required for diagnosing the panic.
Why Other Options Are Incorrect:
[References:"ONTAP Hardware Troubleshooting Guide" listspelogandSSRAMas tools for analyzing PCI errors., "ONTAP Panic Analysis Guide" emphasizes the importance of collecting detailed hardware logs., , ]
Contribute your Thoughts:
Chosen Answer:
This is a voting comment (?). You can switch to a simple comment. It is better to Upvote an existing comment if you don't have anything to add.
Submit