Comprehensive and Detailed Explanation
Cyclic Redundancy Check (CRC) errors in NetApp ONTAP indicate that network frames have failed integrity verification during transmission. These errors commonly originate from physical-layer problems, including defective optical transceivers, damaged fiber-optic cables, loose connectors, or faulty network interfaces.
The correct initial component to reseat among the available options is the Small Form-factor Pluggable (SFP) transceiver.
An SFP is a removable transceiver that provides connectivity between the controller's network adapter and the corresponding switch port. A poorly seated or defective SFP can introduce signal degradation, resulting in CRC errors, packet retransmissions, and reduced network performance.
NetApp's knowledge base explicitly recommends reseating SFP modules at both ends of the connection as part of the diagnostic process.
Administrators can investigate the affected interface using:
network port show
network port show -health
For detailed interface error statistics, use the node-level ifstat utility.
If errors continue after reseating, inspect optical cables, transceivers, switch ports, and network adapters. Examine whether CRC counters increase after corrective action.
Option B and Option D involve entire switches, which should not be reseated for an isolated physical-link issue. Option C involves the adapter, a more intrusive troubleshooting step.
Therefore, A is correct.
Official NetApp References / Study Guide Topics:
NetApp Support Engineer ONTAP — Troubleshooting NetApp hardware and software: network connectivity troubleshooting, hardware error detection, CRC monitoring, and transceiver diagnostics.
[Reference:NetApp Knowledge Base — CRC Errors Due to Faulty SFP, =========================]
Submit