The correct commands to create an ext3 filesystem on /dev/sdb1 are /sbin/mke2fs -j /dev/sdb1 and /sbin/mkfs -t ext3 /dev/sdb1. These commands format the partition /dev/sdb1 with the ext3 filesystem type. The first command uses the mke2fs utility with the -j option, which enables journaling. The second command uses the mkfs utility with the -t option, which specifies the filesystem type. Both commands are equivalent and can be used interchangeably. The other options are incorrect because they use the wrong syntax or parameters for the commands. Option C is wrong because the -c option for the mkfs command checks the device for bad blocks, not the filesystem type. Option D is wrong because there is no such utility as mke3fs. The correct utility name is mke2fs.