Exact Extract
“Session management; UE IP address allocation; User-plane function selection and control; UPF service control; QoS and policy execution; Downlink data arrival notification.”
— Huawei Training Material, Main Network Functions of the 5GC, page 95.
Technical Deep Dive
During UE-initiated PDU session establishment, the UE sends information identifying the requested session and its service requirements. The request is transferred to the SMF through the AMF using the appropriate NAS transport and service-based signalling procedures.
A. DNN: The Data Network Name identifies the data network that the UE wishes to access. Examples include an operator Internet DNN or a dedicated enterprise DNN.
B. Network slice information: The S-NSSAI identifies the network slice associated with the requested PDU session. This information assists the network in selecting the appropriate SMF and applying the subscribed slice configuration.
C. SSC mode: Session and Service Continuity (SSC) mode identifies the requested continuity behaviour for the PDU session. The modes are SSC Mode 1, SSC Mode 2, and SSC Mode 3.
D. QFI: The QoS Flow Identifier identifies a QoS flow within a PDU session. The QFI is assigned or determined by the network's session and QoS control framework, rather than being a mandatory parameter supplied by the UE when initiating a new PDU session. The SMF controls QoS flow establishment and provides the relevant QoS information to the access network and UE.
A critical protocol distinction is that the DNN and S-NSSAI are normally transported in the accompanying NAS transport information, whereas the requested SSC mode is part of the PDU Session Establishment Request's session-management content. The QFI is associated with the QoS flows subsequently authorized and established by the network.
3GPP TS 23.501 and TS 23.502 define this session establishment and QoS flow framework. Therefore, D is correct.
Submit