Exact Extract — Core Network Functions
“The core network is responsible for: Providing user connections; Mobility management and session management; User authentication; Charging management; Providing interfaces for connecting to external networks.”
— Huawei Training Material, Position and Main Functions of the Core Network, page 88.
Technical Deep Dive
The Session Management Function (SMF) controls PDU sessions, while the User Plane Function (UPF) performs packet forwarding and related user-plane operations. They communicate through the N4 interface using PFCP.
A typical PFCP session establishment exchange is:
SMF → UPF: PFCP Session Establishment Request
UPF → SMF: PFCP Session Establishment Response
A. No address pool is configured on the UPF: When UPF-based UE IP address allocation is required, the UPF must have an eligible address pool or another supported allocation mechanism. If an address cannot be allocated because the required pool is absent, the session establishment procedure may fail.
C. The address pool resources on the UPF are exhausted: Even when a valid address pool exists, resource exhaustion can prevent the UPF from allocating an address. The UPF may reject the request with an appropriate resource-related PFCP failure cause.
A faulty N4 link normally causes PFCP communication failures or timeouts. It does not ordinarily result in a successfully received PFCP response containing a resource-exhaustion cause. Missing SM subscription data in the UDM can prevent PDU session establishment at an earlier stage, before UPF resource allocation is attempted.
3GPP TS 29.244 defines PFCP Cause 75, No resources available, as a resource-unavailability condition.
Important question correction: The original scenario reverses the signalling direction. In the normal PDU session procedure, the SMF sends the PFCP Session Establishment/Modification Request to the UPF, and the UPF responds. The answer A, C applies to that corrected interpretation and assumes UPF-based address allocation is configured.
Submit