Exact Extract — Relevant Core-Network Responsibilities
“The core network is responsible for: Providing user connections; Mobility management and session management; User authentication; Charging management; Providing interfaces for connecting to external networks.”
— Huawei 5G Training Material, Position and Main Functions of the Core Network, page 88.
Technical Deep Dive
The correct Huawei UDG 21.0 MML command is SET IPALLOCRULE . This command configures the global IP address-assignment rule used by the UDG. The global rule determines the default address allocation behaviour for subscriber sessions unless a more specific configuration overrides it.
The UDG can support different UE address-assignment models, including control-plane allocation and user-plane allocation. Under user-plane allocation, the UPF assigns an IP address from a locally configured address pool. The allocation information is communicated to the SMF through PFCP signalling over the N4 interface.
The important distinction between the commands is their configuration scope. SET IPALLOCRULE defines the global IP allocation rule. SET APNIPALLOCRULE defines an APN-specific address allocation rule, allowing a particular APN/DNN to use behaviour different from the default.
This distinction is explicitly established in Huawei's 5GC Session Management Data Configuration command sequence, where the global configuration step precedes the optional APN-specific override.
In deployment and troubleshooting, engineers should verify the global rule, any APN-specific override, address pool availability, and the N4 PFCP association. An incorrect assignment rule may cause PDU session establishment failures, unexpected allocation-source selection, or depletion of an unintended address pool.
Therefore, C is correct.
Submit