The Physical Downlink Control Channel (PDCCH) is the closest applicable choice for the HARQ control mechanism associated with 5G NR uplink data transmissions.
In NR, uplink user data is transmitted through PUSCH. The gNodeB receives and decodes the transmitted transport block and determines whether retransmission is necessary.
Unlike LTE, NR does not define the Physical Hybrid ARQ Indicator Channel (PHICH) for explicit acknowledgment of uplink transmissions.
Instead, NR employs asynchronous uplink HARQ operation controlled through scheduling information provided by the gNodeB.
The PDCCH carries Downlink Control Information (DCI), including uplink grants specifying the HARQ process identifier, New Data Indicator (NDI), and redundancy version.
When retransmission is required, the gNodeB can schedule the corresponding HARQ process again without toggling its NDI.
When new data is scheduled for the same process, the NDI toggles, allowing the UE to distinguish new transmission from retransmission.
PUCCH , by contrast, carries HARQ-ACK feedback transmitted by the UE for downlink PDSCH reception. It does not carry acknowledgment information from the gNodeB for uplink PUSCH reception.
Therefore, PDCCH is the closest answer, but it carries uplink HARQ scheduling instructions rather than an explicit standalone ACK/NACK indication.
Official Reference: 3GPP TS 38.321, Sections 5.4.1–5.4.2, UL Grant Reception and HARQ Operation ; TS 38.212, Section 7.3.1, DCI Formats .
Technical warning / qualification: The document's explanation selects PUCCH, but this confuses feedback transmitted on the uplink for downlink data with feedback concerning uplink data . A technically correct version should ask: Which physical channel carries DCI used to control HARQ retransmissions for 5G NR uplink data? The answer would then be C.
Submit