System Information Block 5 (SIB5) is the correct answer because it provides information required for inter-Radio Access Technology (inter-RAT) cell reselection from 5G NR to LTE E-UTRA.
When an NR UE operates in RRC_IDLE or RRC_INACTIVE, cell reselection allows it to identify and camp on a more appropriate serving cell according to broadcast network priorities and radio conditions.
The NR network broadcasts the relevant E-UTRA reselection configuration through SIB5.
According to 3GPP TS 38.331, SIB5 contains the carrierFreqListEUTRA information element, identifying LTE carrier frequencies that the UE may evaluate.
It also contains t-ReselectionEUTRA , which determines the applicable inter-RAT reselection timing requirement.
Additional information can include frequency priorities, reselection thresholds, minimum received signal-level requirements, and neighboring-cell restrictions.
These parameters allow the UE to compare candidate LTE cells against the NR serving cell and apply the configured reselection criteria.
The remaining options serve different functions.
SIB3 provides NR intra-frequency cell-reselection information.
SIB4 provides NR inter-frequency cell-reselection information.
SIB6 is not the system information block used to advertise the NR-to-E-UTRA reselection frequency configuration.
Therefore, SIB5 is specifically responsible for supplying the LTE frequencies and associated reselection parameters configured by the NR network.
Official Reference: 3GPP TS 38.331, Section 6.3.1, SIB5 Information Element ; TS 38.304, UE Procedures in Idle Mode and RRC_INACTIVE .
Submit