Exact Extract — Network Planning, Design, Configuration and Quotation Guide, Page 62
“Each E9612 subrack used as the master subrack needs to be configured with two system control boards.”
Additional Training Reference — Page 65
The E9600 subrack configuration guidance distinguishes E9624 electrical-layer subracks from E9612 optical-layer subracks. It also specifies that an E9612 master uses SCC boards, whereas an E9612 slave does not require those system control boards.
Technical Deep Dive:
Huawei ' s master–slave subrack management architecture allows multiple subracks to be managed within a coordinated network-element arrangement.
The master subrack provides the necessary system control and management functions. Slave subracks extend the available equipment resources while operating under the relevant control architecture.
Option A: Describes an E9612 master with an E9624 slave. This is a cross-model combination and therefore requires support from the applicable release and system control-board configuration.
Option B: Describes an E9624 master with an E9612 slave. This is consistent with integrated electrical-layer and optical-layer deployments in which an E9624 provides electrical-layer functionality while E9612 equipment provides wavelength-layer resources.
Option C: Describes an E9612 master with E9612 slaves. The training directly documents the configuration of E9612 master and slave roles.
Option D: Describes an E9624 master with E9624 slaves. E9624 supports cascaded management using its system control and cross-connect architecture.
Mixed E9612/E9624 optical transport systems are technically established. Independent interoperability testing also documents combined E9612 and E9624 configurations operating as a logical unit.
Technical Conclusion: A, B, C, and D are the broader intended selections.
Verification qualification: The uploaded training establishes E9612 master/slave operation and mixed E9612/E9624 deployments but does not expressly verify every directional master–slave combination. The precise admissibility of A and B must therefore be checked against the applicable Huawei hardware release and cascading rules. The supplied answer explanation claiming that only identical chassis models can be combined is not established by the training material.
Submit