Exact Extract — Huawei V3.0 Training Material, PDF Page 130
Availability (A) = MTBF / (MTBF + MTTR)
Storage-system availability is influenced by both the frequency of failures and the time required to restore service after a failure.
Mean Time Between Failures (MTBF) represents the average operational period between failures for a repairable system.
A higher MTBF indicates that failures occur less frequently on average.
Mean Time to Repair (MTTR) represents the average time required to repair or recover the affected system.
A lower MTTR reduces the duration of service interruptions.
Huawei's training material expresses steady-state availability using the formula:
A = MTBF / (MTBF + MTTR)
Consider two storage systems with the same MTTR of two hours.
If the first has an MTBF of 10,000 hours, its calculated availability is approximately 99.9800%.
If the second has an MTBF of 20,000 hours, its calculated availability increases to approximately 99.9900%.
Because the repair time remains unchanged while failures become less frequent, the proportion of time that the system remains operational increases.
Storage reliability technologies such as controller redundancy, RAID protection, SSD wear leveling, and proactive fault prediction can contribute to improved reliability.
Rapid failover and reconstruction mechanisms can help reduce service-recovery time.
Therefore, increasing MTBF while keeping MTTR fixed increases availability.
Answer: A. TRUE.
Submit