The Huawei Box 310 supports multiple methods of connecting and powering the Touch conference-control panel.
One supported method is to connect the Touch directly to the Box 310 using a network cable. The cable connects the Touch's PoE interface to the dedicated TOUCH port on the endpoint.
In this configuration, the Box 310 supplies electrical power to the Touch through the network connection. A separate Type-C power adapter is not required.
Huawei's Lab Guide explicitly identifies the TOUCH port as supporting power delivery to the Touch.
The Touch also includes a USB Type-C interface that can be connected to a dedicated power adapter. This interface is relevant when an alternative cabling or power-supply arrangement is used.
However, the statement incorrectly asserts that the Touch must be powered using a Type-C cable connected to a separate power adapter.
Huawei supports direct power delivery through the endpoint's TOUCH port, making the asserted requirement unnecessary.
Therefore, option B is correct.
The distinction matters during installation because selecting the correct cabling arrangement simplifies deployment and prevents unnecessary power-supply connections.
The supported power arrangement must be determined from the endpoint model and the selected Touch cabling topology.
Huawei reference: Lab Guide, Section 1.2.1.2, Touch Structure, PDF page 16; Section 5.1.1, Directly Connecting the Touch Using a Network Cable, PDF page 151.
Submit