Virtual Switching Extension (VSX) is a high-availability technology that allows two ArubaOS-CX switches to operate as a single logical device. Split-recovery mode is a feature that prevents traffic loss when the Inter-Switch Link (ISL) goes out-of-sync and keepalive subsequently fails. When split-recovery mode is enabled, the secondary VSX member disables its downstream links until it synchronizes with the primary member. When split-recovery mode is disabled, the secondary VSX member keeps its downstream links up even when it is out-of-sync with the primary member1. Disabling split-recovery mode does not affect how the primary switch waits a period before it takes over as the primary switch after a failure and reboot. The primary switch always takes over as the primary switch immediately when it comes back online, regardless of the split-recovery mode setting. To make the primary switch wait a period before it takes over as the primary switch, you need to configure a preemption delay on both VSX members1. Therefore, this is not a use case for disabling split-recovery mode on ArubaOS-CX switches in a VSX fabric.