A newly deployed BIG-IP Virtual Edition (VE) in VMware requires initial configuration of itsmanagement-ipaddress so it can be accessed over the network. F5 provides several valid mechanisms during initial console access:

A. Running the config utility

The config script is available on new BIG-IP installations and VE deployments.

It launches a guided text-based wizard allowing configuration of:

Management IP

Netmask

Default route

This is a standard and recommended method during first-time setup.

B. Using TMSH with create sys management-ip

Administrators can enter TMSH directly from the console and run:

create sys management-ip /

The management-ip object resides undersys, not under ltm or any other module.

This is the correct tmsh method for defining the management interface address.

Why the other options are incorrect:

C. create ltm management-ip

There isnosuch object under /ltm.

LTM handles traffic objects (virtual servers, pools), not system management interfaces.

D. Running the setup command

The setup command is used for general system configuration butdoes not configure the management-ip.

It is not the supported method for initial management IP assignment on VE deployments.

Therefore, the valid methods are running theconfigutility and using thesys management-ipcommand within TMSH.