Customer XYZ has deployed Bring your own PSTN option to route calls to his Webex Contact Center environment. Callers calling in are reporting getting a reorder tone followed by a call drop.
Which action helps to identify the cause of the issue?
A.
Check the SIP trunk status on the customer’s Session Border Controller.
B.
Verify that the Webex Contact Center channels are associated.
C.
Review the Webex Contact Center Analyzer that checks the call logs.
D.
Review the Webex Contact Center Queues configuration.
A reorder tone followed by call drop at call ingress is usually a telephony signaling or trunk acceptance symptom, not an Analyzer or queue-configuration symptom. In a Bring Your Own PSTN design, the customer's PSTN carrier and session border controller are responsible for delivering calls toward Webex Contact Center through the agreed voice path. Cisco's Webex Calling and Local Gateway documentation emphasizes trunk status, SIP connectivity, registration or certificate state, and SBC reachability as the first checks when calls fail before application routing. If the call cannot be successfully established across the customer's SBC or Local Gateway, Webex Contact Center will not have a usable interaction to queue, analyze, or route. Analyzer becomes useful after the platform has received enough call data to create records; it is not the first place to diagnose a reorder tone at ingress. Channel and queue association should still be reviewed later, but the symptom points first to SIP trunk status on the SBC. Reference: Cisco Help, Get started with Local Gateway; Configure trunks, route groups, and dial plans for Webex Calling.
Contribute your Thoughts:
Chosen Answer:
This is a voting comment (?). You can switch to a simple comment. It is better to Upvote an existing comment if you don't have anything to add.
Submit