The characteristic that distinguishes multicast mode from unicast mode is where the packet replication takes place. In unicast mode the controller makes a copy of the multicast packet for every AP, which is a heavy burden for the controller and for the link towards it. In multicast mode, the controller sends a single packet to the CAPWAP multicast group address, and the packet is replicated by the routers and switches of the network along the multicast tree, with each AP that joined the group receiving a copy. The consequence for the wireless network is that the replication is performed on the network, not on the controller, and the network must support multicast routing between the controller and the APs. The statements that the controller replicates the packet, or that it sends every multicast packet to the associated APs, describe unicast mode. The description of sending packets to a user group is not a function of either mode.
[Reference:Blueprint 3.3 (Implement multicast on a WLAN); Cisco Wireless Controller Configuration Guide, multicast and unicast delivery. Source key listed A; corrected to C (see appendix)., ]
Contribute your Thoughts:
Chosen Answer:
This is a voting comment (?). You can switch to a simple comment. It is better to Upvote an existing comment if you don't have anything to add.
Submit