A wireless controller has a RADIUS server configured globally. Another RADIUS server is mapped for WLAN A in this controller. Which RADIUS server does the controller use for authenticating clients from WLAN A?
A.
RADIUS server that is globally configured
B.
first the RADIUS server that is mapped for WLAN A, and if authentication fails, it reverts to the RADIUS server that is globally configured
C.
RADIUS server that is mapped for WLAN A
D.
first the RADIUS server that is globally configured, and if authentication fails, it reverts to the RADIUS server that is mapped for WLAN A
RADIUS servers on a wireless controller can be defined globally and also selected for individual WLANs. When a WLAN has its own authentication server list, that list takes precedence for the clients of this WLAN, and the global server is not consulted. The global list is used only when the WLAN does not specify servers of its own. The controller does not combine the two lists, and it does not try one after the other. If the mapped server rejects the authentication, the controller does not fall back to the globally configured server, because the Access-Reject is a valid answer from the authentication server. This behaviour allows different WLANs, for example corporate and guest, to authenticate against different servers. For clients of WLAN A, the controller therefore uses the RADIUS server that is mapped to WLAN A. This makes it important to review the per-WLAN server list whenever authentication fails for only one SSID while others work normally.
[Reference:Blueprint 6.3 (Implement client security on different wireless architectures and ISE); Cisco Wireless Controller configuration guide, RADIUS servers per WLAN., ]
Contribute your Thoughts:
Chosen Answer:
This is a voting comment (?). You can switch to a simple comment. It is better to Upvote an existing comment if you don't have anything to add.
Submit