When a positive biological indicator (BI) is detected, the immediate response is to retest the sterilizer using another BI to confirm results. This helps distinguish between a true sterilization failure and a defective BI.

The CBIC Study Guide advises:

“If there is no indication of abnormalities, then the sterilizer should be tested again in three consecutive cycles using paired biological indicators from different manufacturers.”

Immediate recall is reserved for implant loads or confirmed sterilization failure.

Incorrect responses:

A. Check employee technique may be appropriate later but not as a first step.

B. Informing risk manager or C. Notifying patients occurs only after confirmation of failure.